top of page

INSTRUCTIONS

It's so easy to use!

black trainer before after
Timberlands before and after cleaning
tired trainers  before and after
Kids-white-dirty-clean

Directions:

 

Trainers & Sports Footwear: 
Wet the Bristle brush.
Apply a few drops of Shoe MGK cleaner conditioner to the brush and scrub the shoes thoroughly.
Wipe dry with a clean, dry towel. leave to dry

Suede & Nubuck Footwear: 
Apply a small amount to the dry bristle brush. To avoid water marks, try to wet the whole shoe evenly and quickly at first, then gently rub the whole area gently, thoroughly and evenly. Allow to dry overnight. When dry, brush up the nap with a clean, dry brush. Do not use more water.


Smooth Leather Footwear: 
Pour a few drops onto a dampened soft cloth, sponge, or soft brush. Rub smoothly and evenly over the whole shoe surface. Use a soft dry cloth to wipe off excess moisture and dirt. (Please note. Shoe MGK cleaner conditioner is a CLEANER, not a polish.  It will replenish re natural oils in the leather and clean the surface so that your favourite shoe polish achieves an even better shine.

Fabric Footwear:

Put several onto a very wet brush. Scrub thoroughly and evenly over the shoe. Rinse and allow to dry naturally, ideally not in direct sunlight. Repeat if needed

 

Cleaning White Laces:
The laces can really let the side down once your shoes are nice and clean. A grubby white tie-up spoils the look when the rest of the shoe is sparkling. Thankfully, Shoe MGK cleaner conditioner helps with that too.

Remove laces and scrunch into a ball in the palm of your hand. Dip in water or hold under a tap until evenly wet. Apply few drops of cleaner conditioner onto the wet laces. Rub your hands together vigorously with the laces between your palms. Rinse in clean water. Hold the end of the lace tightly in one hand, allowing it to hang freely. Pinch between your thumb and forefinger with the other hand and pull smoothly to squeeze out all the moisture. Hang out to dry.


SHOE MGK Touch-Up: 
After cleaning your white sports shoes with SHOE MGK Cleaner & Conditioner, allow them to dry thoroughly. Shake the Touch Up bottle with the cap still on. Remove cap, invert the bottle and press the applicator onto your white shoes.


Apply evenly to scuffed areas on the shoe. Use it to cover scuffs (more than one coat may be needed, deep scuffs may require several coats) and fresh up dull or discoloured stitching.
Allow to dry for at least an hour. Buff to a shine if desired. Rinse the applicator with water and replace cap.

 

Use SHOE MGK Water & Stain Repellent after cleaning to protect against water and stain causing agents. Test for colour fastness. Footwear must have a dry, clean surface that is free from dust, dirt, and grease. Hold bottle 15 cm from surface, spraying in a back-and-forth motion. Do not saturate. Be sure to spray area thoroughly and evenly including all seams. Allow to dry for 24 hours (less in a warm, dry space, like an airing cupboard). Test for colour fastness.
 

PLEASE NOTE
Incorrect usage or failure to follow the instructions may invalidate your right to a refund.

bottom of page